There will be no fogging up at all. Lenses will in the worst of conditions just get wet. When going from a cool or cold environment into a warm humid one there will be no reaction at all. Glasses, ski-goggles, diving-goggles, facemasks, hockey-shields, motorcycle face shields will all be more protected. Lenses will stay clean for days.
The total antistatic action will prevent dust from clinging on to the lens surfaces. Therefore much less possibilities of scratching and damaging the lens surfaces. A static charge will be totally dissipated and gone within seconds.
This product has received certification by the Swiss Government to be free of health hazards and toxicity for use by the general public.
Antistatic agents are used to solve the problems as related above by giving antistatic properties to plastics without altering the general mechanical properties of the plastics. Antistatic agents have in their molecules both hydrophobic and hydrophilic radicals. Practically, the hydrophobic radicals turn to the surface of plastics, while the hydrophilic radicals turn to the air attracting the moisture in the atmosphere. The static charge accumulation in plastics is dissipated, through the conductivity of water absorbed by antistatic agents, at the same time, antistatic agents show the action of reducing the accumulation of frictional static charge. Thus, antistatic effect is obtained.
Spray some of the liquid on the lens surfaces and clean lenses with a Kleenex. Once the lenses are clean spray on liquid for a second time and spread it around with fingers. Let it dry and then using a fresh dry towel wipe any smears. One treatment per day will be sufficient. The treatment can also be effective for several days if not washed off..
Some face-shield made from polycarbonate that have no protective coating on the surface might get damaged by this product. If not sure, apply just a little bit of "zero-fog" to a corner of the face-shield or lens. Wait a minute or two before wiping it off to see if any whitening of the surface occurs.
Apply "ZERO-FOG" and place glasses or lens into a freezer for 45 seconds to one minute. Remove from freezer. If lenses do not fog up, treatment has been properly applied Also passing the lens through steam at 30 cm above a steaming water kettle is an adequate test.
Available at your local Optician or Optometrist, from Optical Distributors or direct from OMS Optochemicals at e-mail: oms_optical@yahoo.com credit cards accepted. Distributor for use on swimm goggles at ► http://aquagoggles.com and http://www.swim-shop.com/product_info.php?products_id=34544
Through its effectiveness, Zero-Fog has been for the last few years and is presently used on the inside of Dashboard Instrument covers of 18 of the world wide automotive brands as:
Soe electronic and electric instruments makers have chosen it for the same reason. The meat industry in their deep freeze coolers and many more are getting the use and benefits of Zero-Fog.
Click To Return to ► OptoChemicals Main Page
ZeroFog----------> Material Safety Data Sheet
E-mail us! e-mail: oms_optical@yahoo.com |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
How
Anti-Stat and Anti-fog works on surfaces
Chemical
Nano Technology
Main
