Information on OPL UV curable hard coat resin for optical lenses

Chemical Nano Technology

~ OPL-UV ~
Curable Hard Coat Resin

Updated 01/05/2013

	For older UV-Cure Systems Such as Coburn, Ultra Optics and Others. For Easier Use, Better Flow and a Harder Coat Tint able version with much harder properties than other products..

This material has many advantages over the current products sold by the UV-Cure Hard-Coat equipment suppliers.

For polycarbonate its use is straightforward. No primer needed, just apply the resin and cure it. For CR39 lenses, apply the primer solution and then the coating material, then cure. No rubbing in of abrasive materials.

There is no shelf life to this product. It can be stored for an indefinite time.

The solvents used are Ethanol, not Butyl alcohol as used in other similar products. Ethanol does not smell and does not represent a major health hazard, as is the case with Butyl alcohol.

Just use this product in any UV-CURE COATING unit as you would with any other product. For CR 39, apply the primer first to break the high surface tension. On POLYCARBONATE, no primer is needed.

The final result is the hardest non-tintable as well as the hardest tint able coating on the market. OPL-UV also is priced to compete successfully.

OPL-UV COATINGS CAN BE STRIPPED WITH OPL-UV STRIPPER. Just heat the caustic solution in a die pot. Insert the lens for 20 to 30 minutes.

Price: $ 75.00 per 500ml bottle

Material Safety Data Sheet
Price Sheet

Chemical Nano Technology

OMS, 177108 Canada Inc.
100 Hymus Blvd, unit J
Pointe Claire, Québec Canada H9R 1E4

Telephone	Fax	Toll Free Telephone
514-426-3055	514-426-1138	800-461-6637

Please add long distance and country code number where necessary.

E-mail us!

e-mail address: oms_optical@yahoo.com